Kodak EasyShare printer dock plus — User's Guide


Table of Contents > Printing without a computer > Printing from a Kodak card reader

3 Printing without a computer

Printing from a Kodak card reader

The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock plus; however, other manufacturers' card readers are not supported.

NOTE: To help you select pictures to print, dock your EasyShare camera (see Docking and charging your EasyShare digital camera) before connecting the card reader.

  1. Open the accessory door on the printer dock.


  2. Plug the USB connector from the card reader into the USB connector located on the side of the printer dock.

NOTE: If the card reader is already plugged in but the connection has timed-out, disconnect then reconnect the USB cable to re-establish a connection.

  3. Insert the memory card into the card reader (see your card reader user's guide for details). Do not insert more than one card at a time.

The USB device connector light blinks while the printer dock reads the card, then glows steady green.

  • To print the current picture, press the Print button, .

    NOTE: If you tagged pictures for printing using your EasyShare digital camera, instead of printing the current picture, all tagged pictures will be printed (see Printing tagged pictures).

  • To exit without printing, press the Cancel button, .

Purchase a Kodak 8-in-1 card reader, Kodak 6-in-1 card reader, and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.



Previous Next