Kodak EasyShare photo printer 300 — User's Guide

Light is off

The power is off.

None required. Connect the power and press to turn the power on (Connecting and turning on the power).

Light glows steady

The photo printer is on.

None required.

Light blinks

The photo printer is printing.

None required.

Light is off

The color cartridge is properly installed and is working normally.

None required.

Light blinks

Slow blink (for several seconds): the color cartridge is nearly depleted.

None required.

Fast blink: there is a color cartridge jam

Clear the jam (), then press .

Light glows steady

The color cartridge is depleted.

Install a new color cartridge (Installing and removing the color cartridge), then press .

The color cartridge is not installed or is not fully seated.

Remove and re-install the color cartridge (Installing and removing the color cartridge), then press .

Light is off

The paper tray is properly installed and has an ample supply of paper.

None required.

Light blinks

There is a paper jam.

Clear the jam (), then press .

Printing stopped during mid-print; the paper may be damaged or is missing removable tabs ().

Remove loose paper. Check the paper supply. Reload with new paper if necessary, then press .

Light glows steady

The paper tray is empty.

Load paper (Loading the paper), then press .

The paper tray is not installed or is improperly installed.

Remove the paper tray, check that paper is properly loaded, and re-install (Installing and removing the paper tray). Press to resume printing.

Paper did not feed; removable tabs may be missing or sheets may be stuck together ().

Check the paper supply. Reload with new paper if necessary, then press .

The paper feed roller may be dirty.

Clean the paper feed roller (Cleaning the paper feed roller).