Kodak EasyShare digital picture frame — User's guide

Table of Contents > Changing frame settings > Upgrading your firmware

---

4 Changing frame settings

Upgrading your firmware

Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

Download the firmware to your computer, then upgrade your frame:

1. On your computer, go to www.kodak.com/go/digitalframedownloads.

2. Follow the screen directions to download the frame firmware to your computer.

3. Copy the IMG file to a memory card or USB flash drive, then insert into the frame; or, connect your computer and frame with the USB cable and copy the IMG file directly to the frame. See Copying between your frame and computer for copying files.

4. With the IMG file on the frame, press Home , then highlight Settings and press OK.

5. Select Firmware Upgrade and press OK to begin the upgrade.

   IMPORTANT:

   Do not turn off the frame during the upgrade!

   
   

6. When the upgrade is complete, turn off the frame and unplug the power cable. Plug the power cable back in and turn on the frame.

Previous Next