Kodak EasyShare M820/M1020 digital frame — Extended user guide


Table of Contents > Changing settings and more > Setting the clock and timer

4 Changing settings and more

Setting the clock and timer

Manually setting the clock

  1. Tap (Home), then (Settings).

  2. Highlight Clock and timer, then tap OK.

  3. Highlight Set time, then tap OK.

  4. Slide to set the hour. Tap the right arrow to highlight the next setting (minutes), then slide to adjust it.

  5. Tap OK to accept your changes.

Setting automatic on/off

Set your frame to turn on and off at a specified time every day.

NOTE: Set the clock before enabling auto on/off.

  1. Tap (Home), then (Settings).

  2. Highlight Clock and timer, then tap OK.

  3. Highlight On/Off schedule, then tap OK.

    The current time is displayed and the hour field is highlighted.

  4. Slide to adjust the hour. Tap the right arrow to highlight the next setting (minutes), then slide to adjust it. Repeat to set Turn off time.

  5. Tap Enable, then OK when you're done.

    Your frame will now automatically turn on and off at the times you specified.

    NOTE: Make sure the power button on the frame is On. See Turning on your frame.

If your frame loses power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock after losing power.



Previous Next