Kodak EasyShare M820/M1020 digital frame — Extended user guide

Table of Contents > Changing settings and more > Upgrading your firmware

---

4 Changing settings and more

Upgrading your firmware

Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

Download the firmware to your computer, then upgrade your frame:

1. On your computer, go to www.kodak.com/go/digitalframedownloads.

2. Follow the screen directions to download the frame firmware to your computer.

3. Copy the IMG file to a memory card or USB flash drive, then insert into the frame. See Copying between your frame and computer for copying files.

4. Tap (Home), then (Settings).

5. Highlight Firmware Upgrade, then tap OK to begin the upgrade.

   IMPORTANT:

   Do not turn off the frame or remove the memory card or USB flash drive during the upgrade!

   
   When the upgrade is complete, your frame automatically restarts. If it doesn't, press the power button on the frame to Off, then back to On.
   
   
   

Previous Next