KODAK EASYSHARE W820/W1020 Wireless Digital Frames — Extended user guide


Table of Contents > Changing settings and more > Setting the clock and timer

7 Changing settings and more

Setting the clock and timer

Manually setting the clock

  1. Tap (Home), then (Settings).

  2. Highlight Clock and timer, then tap Select.

  3. Highlight Set time, then tap Select.

  4. Slide to set the hour. Tap the Next arrow to highlight the next setting (minutes), then slide to adjust it.

  5. Tap Save to accept your changes.

Getting the time from the Internet

  1. Make sure your frame and computer are connected to your wireless network (see Connecting to your wireless network) and your computer is connected to the Internet.

  2. On your frame, tap (Home), then (Settings).

  3. Highlight Clock and timer, then tap Select.

  4. Highlight Get time from Internet, then tap Select.

  5. Highlight Turn on, then tap Select.

  6. Highlight a Time Zone, then tap Save to accept your changes.

Setting automatic on/off

Set your frame to turn on and off at a specified time every day.

NOTE: Set the clock before enabling auto on/off.

  1. Tap (Home), then (Settings).

  2. Highlight Clock and timer, then tap Select.

  3. Highlight On/Off schedule, then tap Select.

    The current time is displayed and the hour field is highlighted.

  4. Set the Turn on time. Slide to adjust the hour. Tap the Next arrow to highlight the next setting (minutes), then slide to adjust it. Repeat to set Turn off time.

    NOTE: Make sure the on time is earlier than the off time or the frame turns off itself at unspecified times.

  5. Tap Enable, then Save when you're done.

    Your frame will now automatically turn on and off at the times you specified.

If your frame loses power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock after losing power.




Previous Next