KODAK EASYSHARE W820/W1020 Wireless Digital Frames — Extended user guide

Create file failed.

The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected.

• See your device documentation to remove write protection.

• Insert or connect a different device.

Printer unavailable.

Unable to connect to printer.

• Make sure your printer is on and the USB cable is securely connected (see Printing to a PictBridge enabled Printer).

• Make sure you changed your USB connection mode from computer to printer (see Manually changing USB connection mode).

Printing error.

• Make sure your printer is on and the USB cable is securely connected (see Printing to a PictBridge enabled Printer).

• Check your printer for more info.

Time out occurred while printing.

• Check cables and printer supplies. Print again.

Write failed. Select another location.

The frame was unable to copy the picture.

• Insert a different card or device (see Inserting a memory card).

Unable to create file. Device write protected or full.

The frame was unable to copy the picture.

• Insert a different card or device (see Inserting a memory card).

• Remove write protection, unlock card.

• Delete pictures from card.

Disk full.

Error attempting to open file or directory.

• Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport.

Error duplicate filename.

Error occurred while closing a file.

Error invalid filename

Error reading from file.

Error writing from file.

Error writing a file.

Error writing to a file.

File Copy Failed!

Internal error.

Parameter is invalid.

Unknown error.