KODAK EASYSHARE Digital Frame — S730

Table of Contents > Getting started > Charging the battery

---

1 Getting started

Charging the battery

Your frame's rechargable battery was installed at the factory.

Charging

• Plug the frame in and leave the power connected for at least 3 hours.

  The battery automatically charges when the AC power adapter is connected. You don't need to turn the frame on.

Using battery power

• Because the battery may be fully discharged when you unpack your frame, you must charge the battery for at least 3 hours before running the frame on battery power.

• Unplug the AC adapter and share your pictures at a party or wedding, or take your frame to an outdoor event where AC power is unavailable.

• Your frame can run for up to an hour* on battery power.

  *Battery life may vary. Factors that may adversely affect battery life include playing videos, playing audio files, using a high volume setting, and using a high screen brightness setting.

Monitoring battery charge level

The battery icon indicates the charge level.

	Full charge
	1/2 charge
	Empty—icon blinks for 5 seconds, then the frame turns off. Plug in the AC adapter and charge the battery.

NOTE:

If your frame hasn't been plugged in to AC power for a long time (more than a year), you may need to refresh the battery to fully charge it. See Refreshing the battery.

Previous Next