Kodak EasyShare printer dock plus — User's Guide


Table of Contents > Using the printer dock plus with a computer > Transferring pictures from your Kodak EasyShare digital camera

6 Using the printer dock plus with a computer

Transferring pictures from your Kodak EasyShare digital camera

  1. Make sure Kodak EasyShare software is installed (see Installing software) and the printer dock is connected to your computer (see Connecting to a computer).

  2. Place the camera on the printer dock (see Docking and charging your EasyShare digital camera).

  3. Press the Transfer button, , on the printer dock.

    Kodak EasyShare software opens on your computer (if it is installed).

  4. Use Kodak EasyShare software to transfer pictures from the printer dock to your computer. See the Kodak EasyShare software Help for details.

    The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, the camera is removed from the printer dock, or the connection times-out.

    NOTE: With the software installed, pressing the Transfer button establishes a new drive connection for the docked camera. You can view, copy, delete, and otherwise manage files on the new drive, as you do with other drives on your computer. See your computer documentation for details.

    • To stop transfer, press the Cancel button, .



Previous Next