Kodak EasyShare digital picture frame — User's guide

Create file failed.

The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected.

• See your device documentation to remove write protection.

• Insert or connect a different device.

Error attempting to open file or directory.

• Turn off the frame, then turn it back on. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport.

Error duplicate file name.

Error occurred while closing a file.

Error invalid file name

Error reading from file.

Error writing from file.

Error writing a file.

Error writing to a file.

File Copy Failed!

Internal error.

Parameter is invalid.

Unknown error.

Please enter your SSID.

• Enter the name of your network. If you do not know it, contact your system administrator or the person who set up your wireless network.

Printer unavailable.

Unable to connect to printer.

• Make sure your printer is on and the USB cable is securely connected (Printing to a PictBridge enabled printer).

• Make sure you changed your USB connection mode from computer to printer (Printing to a PictBridge enabled printer).

Printing error.

• Make sure your printer is on and the USB cable is securely connected (Printing to a PictBridge enabled printer).

• Check your printer for more info.

Time out occurred while printing.

• Check cables and printer supplies. Print again.

Unable to create file. Device write protected or full.

The frame was unable to copy the picture.

• Insert a different card or device (Inserting a card or camera), or change the picture location setting (Home screen—picture sources and settings).

• Remove write protection, unlock card.

• Delete pictures from card.

Unable to get dynamically assigned IP address.

DHCP (see Glossary) is not enabled at the router.

• Make sure your router is properly configured and DHCP is enabled.

• Contact your system administrator or the person who set up your wireless network.

Verify network settings.

• Contact your system administrator or the person who set up your wireless network.

Verify security code.

You have network security turned on.

• Enter the security code you created when you set up your wireless network.

• Contact your system administrator or the person who set up your wireless network.

Write failed. Select another location.

The frame was unable to copy the picture.

• Insert a different card or device (Inserting a card or camera), or change the picture location setting (Home screen—picture sources and settings).